You can also use a mild dish detergent and hot water to clean the tiles. After you’ve cleaned the area, dry it completely with a towel or cloth, so that no moisture leaks into the areas covered by the sealant.
Use a pair of needle-nose pliers to grip and pull at the silicone if you have difficulty doing so with your hands. Use a blade to carefully dig out any sealant stuck in corners or other tricky areas. Work slowly and deliberately. Patience is key!
Always use protective gear like gloves when working with mineral spirits.
Use a plastic caulk remover to avoid scratching metal surfaces. Work slowly and deliberately to avoid injury.
Wear rubber gloves and a respirator mask when working with mineral spirits, since they’re toxic to ingest and can irritate your skin. Wash any skin that comes into contact with hand soap and warm water. [12] X Research source
Mineral spirits tend to dry quickly themselves, but wipe any particularly damp areas with a clean, dry cloth in order to remove any excess moisture from the wood.
